Just fishing

Fishing in this case refers to routing wires from the front of the vehicle to the back. Since the charger and the majority of the batteries are in the back of the car there needs to be a way to connect the components in the engine bay to the components in the rear.

To accomplish this I constructed a conduit made of PVC pipe. The conduit is fastened underneath the vehicle in the approximate position of the old exhaust system. Through the conduit multiple wires will be routed.

I've pulled through most of the smaller wiring. The next step is to pull through the "big wires".






The picture above is where the exhaust pipe ended in the back. I'll connect this to one other piece (seen from inside the vehicle below) in order to get the wires into the battery box.